How to Make a Cannabis Bowl from a Pumpkin
How to Make a Pumpkin Weed Bowl
Last but not least, the hero of spooky season; the great pumpkin weed bowl. We’ve all been left with a loose pumpkin or two on our hands after Halloween is over, and what better fate for these noble fruits than to be transformed into a delightful (and seasonally appropriate) pipe?
First, carve a shallow cavity at the top of the pumpkin, with a small hole at the bottom to allow air (but not flower) to pass through. Now punch two holes to serve as the stem and carb, making sure to get to the pumpkin’s hollow center. The last step? Don’t do drugs if you’re a character in a horror movie. The stoners always get knocked off first.
Step 1: Cut a lid on the top of your pumpkin like you’re carving a jack-o-lantern and carve a shallow hole.
Step 2: Remove the pumpkin’s guts.
Step 3: Punch a small hole in the pumpkin’s side to use as your bowl.
Step 4: Punch an additional hole in the pumpkin’s side from which you’ll inhale.
Step 5: Place the bowl/stem from another bong in the hole you punched and fill the bowl with freshly ground cannabis.
Step 6: Fill your pumpkin halfway with water.
Step 7: Light, inhale, relax, and repeat.
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.
How to Make a Cannabis Bubbler Pipe from a Pineapple
How to Make a Homemade Bubbler Pipe Out of a Pineapple
Maybe there’s a reason SpongeBob was always so cheerful–his pineapple house also makes a fantastic homemade bong.
To recreate the magic of Bikini Bottom, cut off the top of your pineapple and hollow out the center. Next, cut a hole down the side at an angle, filling it with a spare downstem and bowl from another bong before filling the pineapple with water. Inhale, and reflect on how Squidward had it all wrong.
Step 1: Cut the top off your pineapple (but don’t discard it – you’ll need the top later).
Step 2: Hollow out the center of your pineapple.
Step 3: Cut a hole at an angle in the side of your pineapple (a little less than halfway between the pineapple’s top and bottom).
Step 4: Place a spare bowl/stem from another bong in the hole you poked in the pineapple’s side.
Step 5: Fill your pineapple with water.
Step 6: Poke a hole in the pineapple top from which you’ll inhale and place the top back on the pineapple.
Step 7: Load your bowl and smoke.
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.
How to Make a Cannabis Pipe from a Banana
How to Make a Pipe Out of a Banana
We’re not trying to make a monkey out of you–bananas make excellent vehicles for smoking cannabis. And no, that’s not because of the weird urban legend that the peels get you high! You’ll need to stick to cannabis for that.
Our banana pipe, step by step, contains two paths; the easy way and the hard way.
The easy way is to simply poke a (clean!) pen through the center of the banana, starting at the end and continuing until you’ve formed a narrow passageway. Then, poke a second hole at the end of that passageway from above, and voila!
If you want to get fancy, you can cut the bottom of the banana off and hollow it out, perching it atop that secondary hole at the end of your passageway to form a more commodious bowl. This shit is, indeed, bananas.
The Easy Way
Step 1: Using a clean pen, poke a hole through the center of the banana to form a narrow passage starting from the top. This is where you’ll inhale.
Step 2: Create a second hole at the end of the first passageway to make your bowl.
The Hard Way
Step 1: Cut the bottom off the banana and use a pen to create a small hole in the cut-off portion – this will be your bowl.
Step 2: Poke a hole in the top of the banana where you cut off the portion you used for the bowl. Use that hole to create a narrow chamber that runs the length of the banana.
Step 3: Poke a hole that’s roughly the same size and shape as the piece you cut off to make your bowl, and join the bowl piece to the banana.
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.
How to Make a Cannabis Pipe from a Pear
How to Make a Pear Pipe
A tasty Bosc is our pear of choice when discovering how to make a weed pipe from this inimitable fruit, both for its easily pierced flesh and the slightly floral taste it lends the smoke.
Simply punch a hole at the wide end of the pear to create your bowl. Then, carve out as much room as you need for what you want to smoke before channeling two smaller tunnels into the side of the chamber, where you’ll place your weed and inhale away.
Step 1: Punch a hole at the pear’s wind end to create a bowl.
Step 2: Create a second hole from which you’ll inhale at the top of the pear and dig deep enough to meet the first hole you created for the bowl.
Step 3: Create a third hole to the side of the bowl hole to create the carb (ensure all holes meet in the center for proper airflow).
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.
How to Make a Cannabis Pipe From a Peach
How to Make a Peach Pipe
Select a firmer peach if you want to make a homemade smoking pipe, or you might end up with a handful of mush!
To turn a peach into a pipe, create a bowl above the seed by carving a hole into the side of the peach. Then, make a second hole connecting to the stem of your bowl from the side, so the two passages meet. Finish it off with a carb for a peachy keen smoking experience.
Step 1: Select a firm peach.
Step 2: Carve a hole in the peach’s side above the seed to create a bowl.
Step 3: Create a second hole from which you’ll inhale on the opposite side of the hole you created for the bowl – ensure the holes meet in the center.
Step 4: Create a third hole to use as your carb, also ensuring the hole meets the others for proper airflow.
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.
How to Make a Cannabis Pipe from an Apple
How to Smoke Out of an Apple
There’s a reason learning how to make an apple pipe is baby stoner 101. It’s one of the easiest and tastiest ways to transform fruit into a homemade piece for weed.
To make an apple pipe, simply poke a few holes using a pen or pencil. One, running from the top to the center, will be your homemade weed bowl, where the herb will sit. Now, create a second hole from the side, running into the hole descending from the bowl chamber. Your last hole will be the carb, a channel to the side of the mouthpiece. Johnny Appleseed would be proud!
Step 1: Poke a hole that runs from the apple’s top to its center for your bowl.
Step 2: Poke a second hole in the apple’s side that connects to the first hole. This is where you’ll inhale.
Step 3: Poke a third hole in the side that connects to the original hole you created for the bowl to use as a carb.
Need some weed to drop into your new fruit pipe? Hit our site to place an online order from one of our Colorado dispensaries today.